How do I connect the CM-15 via USB-C?
CM-15tutorialguide
The CM-15 connects to a USB host device, such as a laptop or OP-1 field, using the included USB-C cable. When connected and powered on, it appears as a single-input audio interface automatically.
What you need
- The included USB-C cable
- A USB host device (laptop, computer, or compatible device)
- The CM-15 powered on
Steps to connect
- 1.Make sure the CM-15 is powered on by flipping the power switch to the on position.
- 2.Connect one end of the included USB-C cable to the port on the bottom of the CM-15.
- 3.Connect the other end to your computer or host device.
- 4.The CM-15 will appear as a 1-input audio interface in your system's audio settings.
Available sample rates
Once connected, you can select from the following rates in your audio software:
- 44.1 kHz
- 48 kHz
- 88.2 kHz
- 96 kHz
Extra gain in USB mode
An additional plus or minus 12 dB of digital gain is available through your computer's USB interface settings, on top of the hardware pad/gain switch settings.
Note: if you connect the CM-15 while it is turned off, it will only charge the battery and will not show up as an audio interface.