How do I start recording on the TP-7?

Starting a recording on the TP-7 is straightforward. Press record to arm the device (the recording LED will flash), then press play to begin recording. Press stop when you're done.

Basic Recording Steps

1. 1.Press record to arm the device. The recording LED will flash to indicate it's ready.
2. 2.Press play to start recording. The LED turns solid red while recording.
3. 3.Press stop to end the recording.

Configuring Your Input

While the device is armed (recording LED flashing), you can configure your input source:

1. 1.Press record again to access the input configuration screen.
2. 2.Use minus/plus to select which track to record to.
3. 3.Rotate the tape reel to choose your input source (nothing, internal mix, analog, or digital).
4. 4.Use up/down to adjust input gain levels.
5. 5.Press play to start recording with your chosen settings.

Input Source Options

The number of available tracks depends on your sample rate setting in the system menu.