How do I use the TX-6 as a USB audio interface?
TX-6audio interfaceUSBDAW
TX-6 as a USB audio interface:
Capabilities:
- 12 channels to computer (6 stereo pairs)
- 6 channels from computer
- Class-compliant (no drivers needed)
- Works with Mac, Windows, iOS
Setup: 1. Connect TX-6 to computer via USB-C 2. TX-6 appears as audio device 3. Select TX-6 in your DAW 4. Configure inputs and outputs
In your DAW:
- TX-6 channels 1-6 appear as inputs
- Route DAW output to TX-6
- Record directly from TX-6 mixer
- Monitor through TX-6
Multi-track recording:
- Each TX-6 channel is separate in DAW
- Record all sources individually
- Mix later in software
- Best of both worlds
Playback from computer:
- DAW output plays through TX-6
- Mix with hardware sources
- Use TX-6 effects on DAW audio
- Hybrid workflow
Latency:
- Low latency monitoring on TX-6
- Direct monitoring bypasses computer
- Adjust buffer size in DAW for recording
Mobile use (iOS):
- Connect via USB-C or adapter
- Use with GarageBand, etc.
- Class-compliant = just works
Tips:
- Update firmware for best compatibility
- Use quality USB-C cable
- Disconnect other audio devices if issues
- Set sample rate to match DAW
Power note: TX-6 can be bus-powered from some sources or use internal battery.