How do I connect my inputs?

Connecting inputs to the TX-6:

Physical inputs:

Channels 1-6: 3.5mm TRS jacks
Inputs are paired: 1&2, 3&4, 5&6
Stereo sources use both of a pair
Mono sources use single channels

Connection types:

Synths and drum machines:

3.5mm to 3.5mm cable
Or 1/4" to 3.5mm adapter
Connect to input pair
Pan L/R or keep centered

Microphones:

3.5mm mic input
Use channels 5&6 for mic (optimized)
May need preamp for quiet mics
CM-15 works directly

USB audio:

Connect via USB-C
TX-6 becomes audio interface
12 channels to computer
6 channels from computer

Setting input levels: 1. Turn up source output 2. Check TX-6 meters 3. Adjust until healthy level (green, occasional yellow) 4. Avoid red (clipping)

Stereo vs mono:

Stereo: Use both channels of a pair
Mono: Use single channel, pan to center
Link pairs for ganged control

Tips:

Use quality cables
Keep cables short if possible
Balanced cables reject noise better
Check input isn't overloading

Common setups:

1&2: Main synth (stereo)
3&4: Drum machine (stereo)
5: Vocals (mono)
6: Auxiliary (mono)

Connection types:

Related Questions